Most electrical problems start small. A breaker trips, an outlet stops working, a light flickers when the dryer runs. A lot of people reset the breaker, swap a fuse, or just unplug something and move on. That works until it does not, and the point where it stops being sensible is usually when the same problem comes back, or when the symptom is something you cannot explain.
We handle electrical repairs, panel work, wiring, and installations throughout Lebanon and Marion County. Homes in a town this size tend to carry real history in their wiring, and the jobs that come out of that history are exactly what we do. Whether the call is about a single outlet or a full panel replacement, we take it from diagnosis to done.
Electrical pricing is not a flat rate because no two jobs are the same. A straightforward outlet replacement is a different conversation from a panel upgrade or a whole-home rewire, and quoting them the same way would not be honest.
Three things tend to move a quote in either direction. The first is what the fault actually turns out to be once it is properly diagnosed, which is not always what the symptom suggested. The second is what has to be opened up to reach it, since wiring buried in a wall or run through a finished basement takes more time to access than wiring in an unfinished space. The third is whether the existing circuit or panel can carry what the new work requires, or whether the panel needs attention before the rest of the job can proceed.
When you call, you get a price before anything is scheduled. The person who answers the phone can tell you what the visit involves, what the scope looks like based on what you describe, and what would change the number. There is no commitment until you agree to the price.
Call (859) 695-6995 and we will walk through it.
Scheduling starts on the phone. You describe the problem, we ask a few questions to understand the scope, and a price is confirmed before a visit is set. For routine repairs, outlet work, fixture installation, and most panel questions, appointments are available every day from 9 AM to 10 PM.
If the property is a rental and the tenant needs to be present, or if a business needs work done outside business hours to avoid interruption, mention that when you call. We work around those situations regularly, and knowing the constraint upfront is what makes it manageable.
Some problems should not wait until morning. Sparking outlets, a burning smell near the panel, a breaker that will not stay reset, or scorch marks around a receptacle are all calls to make right away. Urgent calls are answered by someone who can scope the situation on the phone. Describe what you are seeing and we will tell you on the phone how to treat it.
A full shutdown is not always what the job needs. Most repairs and many installations only require isolating the one circuit involved. The lights in the rest of the house stay on. The refrigerator keeps running. That is the normal situation.
A panel replacement or a service-entrance upgrade is different. That work requires shutting off the main, and the house is without power for the duration. For someone working from home or a business that cannot close, that window matters. We plan it upfront. You know before the appointment what to expect, how long the outage is likely to run, and what you should have ready before we arrive.
For larger projects, the scope and the outage window are both confirmed on the call before anything is booked. No open questions going into a job that affects the whole building.
Homes built in the 1960s and 1970s frequently used aluminum for branch circuit wiring. The material itself is not the issue. The connections are. Aluminum expands and contracts differently from copper, and over time the connections at outlets, switches, and fixtures loosen. That loosening creates heat. We address it by installing devices rated for aluminum wiring and correcting the connections throughout the affected circuits, which is a more thorough fix than replacing outlets one at a time without addressing how they are connected.
Older homes in Lebanon often have outlets and circuits that were never properly grounded, or where the grounding path exists on paper but has a break somewhere along the run. Grounding and bonding corrections bring those circuits into compliance. This comes up frequently during pre-sale inspections and before adding circuits that require a proper ground to function safely.
Knob-and-tube wiring was standard construction in homes built before the 1940s. It was designed for the electrical loads of that era, which bear no resemblance to what a household draws today. It also lacks a ground conductor entirely. Replacing it is not always a one-visit job. We assess what is present, what can be accessed without opening every wall, and what the replacement path looks like before quoting the work.
A detached garage or workshop that needs more than a single circuit gets a subpanel fed from the main. That gives the space its own breaker positions, handles the load properly, and avoids running multiple long home-run circuits back to the main panel. For outbuildings with power tools, welders, or dedicated circuits for equipment, a subpanel is usually the right answer. We size it for what the space actually needs and what the main panel can support.
An intermittent fault is the hardest kind to chase. The breaker trips sometimes, or the outlet works for a week and then stops, or the lights dim only when a specific appliance runs. We work through the circuit systematically, testing at the breaker, the devices, and the connections along the run. Most intermittent faults come down to a loose connection, a failing device, or a circuit that is carrying more load than it was designed for. Finding it takes patience and a process. If you are still deciding, the services page may help.
Recessed lighting, fixture replacements, and under-cabinet wiring are the most common interior lighting calls. Recessed LED fixtures change how a room feels without requiring any structural work, and replacing an older fixture is often the same visit as replacing the switch that controls it. If a dimmer is going in, the fixture and the dimmer need to be compatible. We confirm that before anything is ordered.
Outdoor lighting comes up most often around entries, garages, and the back of the property. Motion sensor fixtures and security lights are straightforward installations when the box and the wiring are already there. When they are not, we run the circuit as part of the same visit. Landscape and pathway lighting requires a dedicated low-voltage run or a standard circuit depending on the fixtures chosen. If other electrical work is already scheduled, adding an outdoor fixture at the same time saves a separate trip.
Good electrical work is not complicated, it is just done right, and lighting is no exception. The wiring matters as much as the fixture.
We cover Lebanon and the surrounding communities throughout Marion County, including St. Mary, Bradfordsville, Loretto, Springfield, and Raywick. Residential and commercial calls from across that area are welcome.
If you are not sure whether your address falls within our range, ask when you call. We will confirm it in under a minute. Coverage is not limited to the town itself.
It depends on the scope. A single outlet or breaker repair usually does not require a shutdown. Work that involves the main panel or a full circuit shutdown may require taking part of the building offline temporarily. We scope that on the call so you know what to plan for.
Most straightforward repairs, outlet replacements, switch work, breaker swaps, and single-circuit faults are completed in one visit. Larger jobs like panel upgrades or partial rewires are scoped in advance so the visit is planned around what the work actually requires.
We look at alternatives: conduit run along the surface, overhead cable where that is permitted and practical, or a different route that avoids the obstruction. The right approach depends on the specific layout, and we work that out before the job is booked.
Describing what you are seeing is enough. A breaker that keeps tripping, an outlet that feels warm, a light that flickers when the heat kicks on. That is all we need to start the conversation, scope the job, and give you a price before anything is scheduled.
Call (859) 695-6995, every day from 9 AM to 10 PM.
We will take it from there. Safe wiring. Solid workmanship. Straight answers.
We take electrical work in these nearby communities as well: Springfield, Harrodsburg, Danville.
Electrical problems do not always announce themselves clearly. A tripping breaker, a dead outlet, or a panel that cannot keep up with modern loads all point to work that needs careful diagnosis before anything is touched. We handle the full range of residential and commercial electrical work across Lebanon and Marion County, from a single outlet replacement to a complete service upgrade.
Call (859) 695-6995 to get the scope and the price before anything is scheduled.
| Electrical Service | What's Included | When You Need It | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Fuse box replacement, Subpanel installation, Load calculation included | Older homes adding EV chargers, appliances, or HVAC circuits that exceed current panel capacity | A load calculation is part of every panel job. We size the service to what the home actually draws, not just what it has now. |
| Whole-Home Surge Protection | Panel-mounted surge protector, Protection for all circuits at once, Coverage for appliances and electronics, Storm and utility spike protection | Homes in areas with frequent lightning activity or utility fluctuations, including most of Marion County | A whole-home unit at the panel covers everything connected to the house, including appliances that are never plugged into a power strip. |
| Ceiling Fan Installation | Fan and light kit wiring, Ceiling box upgrades for fan weight, New switch leg runs, Fan replacement | Rooms that need a fan added where no ceiling box exists, or where an existing box is not rated for fan weight | Independent fan and light control requires a switch leg that many older installations do not have. We run it as part of the job when needed. |
Call (859) 695-6995 and we will walk through what the job involves, confirm whether we cover your address, and give you the price before anything is scheduled.
(859) 695-6995