Wilmore is a town where the housing stock tells a story. Older homes on established lots, some with wiring that has never been touched since the original build, sit alongside newer construction and the occasional commercial or institutional property. The electrical needs in a place like this vary by address: one house calls about a breaker that will not stay reset, another needs a full rewire because the knob-and-tube is finally showing its age, and a small business needs a dedicated circuit run for equipment that was not part of the original build. We handle all of it.
We serve Wilmore and the surrounding area for residential and commercial electrical work. Whether you own a home, manage a rental, or run a business, the process is the same: call, describe the situation, get the scope and the price on that call, and schedule the visit. We are open every day from 9:00 AM to 10:00 PM.
Call (859) 695-6995 to get started.
Older homes often have devices and panels that are still functional but no longer standard. When a repair calls for a matching breaker, a specific receptacle type, or a device that fits a box from a different era, we identify what is in place before ordering anything. Some components are still available through supply channels even when they have not been in common production for years. When a direct match exists, we use it. When it does not, we explain what the replacement involves and why.
Not every part is on a shelf. If a fitting, a panel component, or a specialty device has to be ordered rather than sourced same-day, we tell you that on the call so the visit is scheduled for when the work can actually be completed. There is no point booking a job around a part that has not arrived yet. For situations where the existing hardware is genuinely obsolete and a like-for-like swap is not possible, we walk through what a proper replacement looks like and what it involves. The goal is a repair that holds up, not one that gets the lights on for a season.
Workshop tools and welding equipment draw more current than a standard household circuit can support. A welder pulling high amperage on a shared circuit will trip the breaker every time, and running it that way long enough causes real wear on the wiring. We size the circuit to what the equipment actually draws, run a dedicated breaker, and wire the outlet to match the plug configuration the tool requires. For outbuildings and detached garages, that often means a subpanel feed as well.
A full rewire replaces the branch circuit wiring throughout the house from the panel outward. A partial rewire addresses specific areas where the existing wiring is damaged, undersized, or no longer safe. In older homes, the decision between the two usually comes down to what is in the walls and how much of it has to go. We assess the current wiring before recommending a scope, because the right answer depends on what is actually there. Grounding and bonding get addressed as part of either project.
Outdoor lighting runs from the panel to wherever the fixture ends up, and that run has to be done with materials rated for outdoor use. Direct-burial cable, weatherproof conduit, and GFCI-protected outdoor receptacles are all part of how exterior wiring is handled correctly. Security lights, motion sensor fixtures, and landscape lighting circuits each have their own considerations depending on where the fixture sits relative to the panel and whether a new circuit is needed or an existing one can carry the load.
Knob-and-tube wiring was the standard for decades, and a number of homes in this area still have it. The problem is not the age alone. It is that knob-and-tube has no ground conductor, cannot be covered with insulation without creating a heat buildup risk, and was not designed for the loads a modern household puts on it. Replacing it means pulling new cable through the walls and reconnecting at the panel. We confirm the full scope before the first wire is pulled.
Low-voltage work covers the wiring that carries signal rather than power: doorbell circuits, ethernet runs, speaker wire, and similar. It is often treated as an afterthought on a renovation, which means it ends up done last and done quickly. We handle rough-in for new construction and additions, replacement of failed doorbell transformers and wiring, and data cabling where a reliable wired connection matters more than a wireless one.
A dead outlet, a switch that sparks when you flip it, or a receptacle with scorch marks around the face are all calls worth making. GFCI outlets are required in kitchens, bathrooms, garages, and outdoor locations, and homes that predate those requirements often have standard receptacles in places where GFCI protection is now expected. AFCI protection on bedroom and living area circuits is another common upgrade on older panels. We also handle outlet additions where a room does not have enough receptacles for how it is actually used, and ceiling fan installations where a new switch leg or a box rated for fan weight is part of the job.
Booking a visit starts with the call. We ask about the problem, where it is happening, and what the panel looks like so we can scope the job and give you a price before anything is confirmed. For straightforward repairs, that conversation is short. For larger projects, it takes a few more questions. Either way, you know what the visit covers before we show up.
For situations that will not wait, we take urgent calls within our hours every day from 9:00 AM to 10:00 PM. A sparking outlet, a burning smell near the panel, or a breaker that will not stay reset are all situations to call about now rather than later.
For tenants and businesses that have to stay operational, we work around what the schedule requires. If a circuit needs to be shut down to do the work safely, we confirm that in advance so nobody is caught off guard. The scope and the timing are both part of the conversation before the visit is booked.
Previous electrical work ranges from code-compliant and well-executed to improvised and genuinely unsafe. When we open a box or pull a panel cover and find something that was done incorrectly, the first step is understanding what it is. A reversed hot and neutral, a missing ground, a double-tapped breaker, or a junction box buried in a wall without a cover are all things that can be corrected without replacing the whole circuit. We explain what we found, what it means, and what the fix involves before touching anything.
Some previous work cannot be corrected in place. Wiring that was run without a ground conductor in a location that requires one, aluminum branch wiring at connections that were never made with aluminum-rated devices, or circuits that were added without a proper breaker in the panel are situations where the fix is a replacement rather than a repair. We tell the difference by looking at what is actually there, not by assuming. No pressure and no gimmicks, just safe, solid wiring and a clear explanation of what the situation calls for.
The price for electrical work depends on what the job actually involves. A single outlet replacement and a panel upgrade are different conversations, and the quote for each one reflects the scope of that specific job. What moves a quote is the fault itself, what has to be opened up to reach it, and whether the existing panel and circuit can carry what the change requires. A load calculation is part of any job that adds significant demand to the panel.
When you call, we ask enough questions to give you a real number rather than a range with nothing behind it. The person who answers the phone can tell you what the visit involves. That price is confirmed before anything is scheduled. If the work uncovers something that changes the scope, we explain it before continuing, not after. You will find the rest of it on the services page covering electrical work.
Call (859) 695-6995 and get the quote on that call.
An outlet that has never worked since you moved in, a switch that throws a small spark when you flip it, an outside light that has been dark for two seasons because nobody has gotten around to it: these are the calls people delay because the situation feels manageable. It usually is, right up until it is not.
A switch that sparks is arcing. Arcing is how wiring faults start. An outlet that has never worked may have a failed GFCI device upstream, a loose connection behind the wall, or a wiring error from a previous project. An exterior light that is out may simply need a fixture swap, or it may be sitting on a circuit with a fault that is also feeding other outdoor receptacles. The only way to know is to look.
These are not dramatic problems. They are quick calls that keep a small issue from becoming a larger one. We are available every day from 9:00 AM to 10:00 PM, and the call itself takes a few minutes.
We serve Wilmore and the surrounding area throughout Jessamine County. Neighboring communities we cover include High Bridge, Keene, Burgin, Salvisa, and the broader county area. Residential and commercial calls from across this area are all handled the same way: scope on the call, price confirmed before the visit, work explained before it starts.
If you are not sure whether your address falls within our range, call and ask. We will tell you directly.
We schedule around the kitchen's hours where we can. If the work requires taking equipment circuits offline, we work out the timing with you in advance so it does not fall during a service period.
We handle the permit process for the work we are doing. Requirements vary depending on the type of job and the jurisdiction. We confirm what is required for your specific job when we scope it on the call.
Sparking outlets, a burning smell from a receptacle or the panel, a breaker that will not stay reset, or any situation where you smell burning but cannot find the source. Those are situations to call about right away. We are available every day from 9:00 AM to 10:00 PM.
A hot tub requires a dedicated 240-volt circuit, a GFCI-protected disconnect installed within a specific distance of the unit, and wiring rated for outdoor and wet-location use. We handle the circuit, the disconnect, and the connection to the panel.
Yes. A single outlet replacement, a switch that stopped working, or a breaker that needs swapping is worth a call. Small problems are easier and less expensive to fix when they are addressed before they develop into larger ones.
Yes. We run circuits to detached garages, workshops, sheds, and other outbuildings. The scope depends on what the structure needs to power and how far it sits from the main panel.
When you call, we ask about the problem, the location, and the panel. By the end of that call, you know what the visit involves, what it covers, and what it costs.
Call Nicholasville Electrical Company at (859) 695-6995.
We are available every day from 9:00 AM to 10:00 PM. Safe wiring. Solid workmanship. Straight answers.
Towns a short way out: Versailles, Harrodsburg, Lawrenceburg, Danville, Lancaster.
Electrical problems do not always announce themselves clearly. A tripping breaker, a dead outlet, or a panel that cannot keep up with modern loads all point to work that needs to be done correctly the first time. We handle the full range of residential and commercial electrical work across Wilmore and Jessamine County, from a single outlet replacement to a complete service upgrade.
Call (859) 695-6995 to get the scope and the price before anything is scheduled.
| Electrical Service | What's Included | When You Need It | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Fuse box replacement, Subpanel installation, Load calculation included | Older homes adding EV chargers, appliances, or HVAC circuits that exceed current panel capacity | A load calculation is part of every panel job. We size the service to what the home actually draws, not just what it has now. |
| EV Charger Installation | 240-volt dedicated circuit, Panel capacity check, Garage and driveway runs, Hardwired or outlet connection | Homeowners adding a Level 2 charger for an electric or plug-in hybrid vehicle | An EV charger or a hot tub often means checking the panel first. We confirm available amperage and breaker slots before the circuit is run. |
| Backup Generator Installation | Transfer switch installation, Interlock wiring, Panel hookup, Circuit selection for generator feed | Jessamine County homeowners who lose power during ice storms, severe thunderstorms, or extended outages | A transfer switch isolates the home from the utility line while the generator runs. Without one, the setup is both a code violation and a safety hazard for utility workers. |
Call (859) 695-6995 and we will walk through what the job involves, confirm whether we cover your address, and give you the price before anything is scheduled.
(859) 695-6995