When something in the wiring stops working or a panel starts acting up, the first question is usually whether the job is as big as it looks. Sometimes it is. A breaker that trips every time the dryer runs might point to an overloaded circuit, or it might point to a panel that has been undersized for years. The difference matters, and the only way to know is to look at what is actually there rather than assume.
We cover Frankfort and Franklin County for the full range of residential and commercial electrical work: repairs, panel work, outlet and switch installation, lighting, dedicated circuits, generator hookups, surge protection, and more. If you are a property owner trying to get a straight answer before committing to a major job, that is exactly the conversation we are set up to have.
Call (859) 695-6995 and we will tell you what the situation calls for.
Some electrical problems are easy to plan around. A ceiling fan that needs replacing or a new outlet added to a garage can go on the schedule when it suits you. Others are not. A breaker that will not stay reset, a burning smell near the panel, or an outlet that sparks when something is plugged in are situations where waiting a few days is not the right answer.
We take short-notice calls and work through what is happening on the phone before the visit is booked. The person who answers the phone can tell you what the visit involves, which means you are not walking into an unknown. You know the scope, you know the price, and you know what to expect before anyone shows up.
For commercial clients and rental properties, the scheduling conversation matters as much as the work itself. A business that has to stay open, a tenant who works from home, or a landlord coordinating access to an occupied unit all need the same thing: a clear plan before the visit starts. We work through that on the call, confirm what access is needed, and schedule around what the situation allows.
We are available every day from 9:00 AM to 10:00 PM.
Call (859) 695-6995 and we will work out what the schedule allows.
Electrical work does not have a single flat rate because the price depends on what the job actually involves. A straightforward outlet replacement is a different scope from running a new circuit through finished walls to a room that was never wired for it. Both are real jobs, and both get priced on what they require.
Three things move a quote more than anything else. The first is what the fault turns out to be once it is diagnosed, since a symptom at the outlet can have its source anywhere along the circuit. The second is what has to be opened up to reach the problem, because wiring behind drywall takes more time than wiring in an unfinished basement. The third is whether the existing panel has the capacity to carry what is being added, since a panel that is already at its limit changes the scope of almost any circuit work.
When you call, you get the price before anything is scheduled. We confirm what it covers, and you decide before the visit is booked. No pressure and no gimmicks, just safe, solid wiring and a price that is explained up front.
Not every electrical job requires shutting down the whole house. Outlet and switch work, ceiling fan installation, and most lighting jobs only need the circuit feeding that area to be isolated. The rest of the home stays live. For a business or a household with someone working from home, that distinction matters, and we plan the work around it.
Panel work is different. Replacing a breaker panel or upgrading the service entrance requires the main power to be off for the duration of that portion of the job. That is not a long window for most panel replacements, but it is a real one, and we confirm it on the call before the appointment is set so you can plan around it.
For larger jobs in Frankfort, the outage window is something we talk through before the visit, not something that gets worked out at the door. If a business needs to schedule the work outside business hours, or a household needs the power back on by a specific time, we factor that into how the job is scoped. The goal is to leave the property clean and powered at the end of the visit, with nothing left open or half-finished. Where a Frankfort job fits is easier to see on our services page for electrical work.
The gap between tenants is the easiest window for electrical work that would otherwise mean disrupting someone's home. No furniture to work around, no schedules to coordinate, no tenant waiting for power to come back on. A vacant unit can have its outlets brought up to GFCI standard, its wiring checked, its panel reviewed, and any corrections made before the next occupant moves in.
Access is straightforward when nobody lives there. Landlords and property managers in Frankfort can arrange the visit directly and hand off whatever access is needed without a third party involved. For older rental stock, which makes up a real portion of the housing in a city this size, a between-tenancy inspection often turns up small items that are far easier to address now than after someone is living there. We scope the job on the call and confirm what the visit will cover before anything is scheduled. One call and we are on it.
Good electrical work is not complicated, it is just done right, and that applies whether the job is a single outlet or a full panel replacement. Below is what comes up most often in Frankfort, described by the situation that leads to the call.
The most common trigger is a home purchase or a property being listed for sale. An inspection covers the panel, the service entrance, grounding and bonding, GFCI and AFCI protection, and the condition of the visible wiring. Older homes in Franklin County frequently have circuits that were added over the years without documentation, aluminum branch wiring from a particular era, or panels that were never sized for modern loads. An inspection report identifies what is there and what, if anything, needs attention.
The situation that leads to this call is usually a light fixture where a fan needs to go, or an existing fan that has stopped working or needs to be replaced. Where a ceiling box is not rated to support a fan's weight, or where the wiring does not include a separate switch leg for the fan and the light, that work is part of the installation. We handle both the straightforward swap and the more involved run.
Ungrounded two-prong outlets, outlets in kitchens and bathrooms without GFCI protection, outlets that have stopped working, and outlets in the wrong location for how a room is used are all common calls. We also handle AFCI breaker installation for bedroom and living area circuits, which comes up in older homes that were wired before that protection was required. Arc-fault and ground-fault protection are not optional additions in a home inspection context. They are what code-compliant wiring looks like now.
The situation here is a generator that is already owned but not yet connected to the home's wiring in a way that is safe and useful. A transfer switch or interlock is what separates a properly installed generator hookup from an extension cord run through a window. We install the transfer switch, wire the circuits the generator will feed, and connect everything to the panel. Regional storm seasons make this a practical investment rather than an optional one.
Outdoor receptacles without weatherproof covers, outlets near water sources without GFCI protection, and properties that simply have no outdoor power at all are the situations that lead here. We run the circuit, install the outlet with the correct weatherproof enclosure, and make sure the GFCI protection is in place. EV charger circuits follow the same process: a dedicated 240-volt run from the panel, sized for the load, with the panel capacity confirmed before the circuit is pulled.
We cover Frankfort as our primary city in Franklin County, and we work throughout the surrounding area as well. Nearby communities we serve include Midway, Lawrenceburg, Stamping Ground, and Versailles. Residential and commercial clients across that area are welcome to call.
If you are not sure whether your address falls within our range, the quickest way to find out is to call. We will confirm it on the spot.
We assess the existing panel capacity, identify the circuits that will serve the new space, and run wiring from the panel to the addition. If the panel does not have enough capacity or available slots, we address that as part of the same project.
We start by confirming what the space needs: lighting only, 120-volt outlets, 240-volt equipment, or a subpanel if the demand is high enough to warrant one. From there we size the circuit or the subpanel and run the supply from the main panel.
We test every circuit, outlet, and fixture we work on before the visit ends. Outlets are tested for correct wiring and polarity, breakers are confirmed to be operating, and any new wiring is verified to be live and correctly connected.
We describe what we found, explain what the concern is, and lay out the options for bringing it up to standard. The decision on how to proceed is yours. We do not pressure a repair, but we do make sure you understand what the condition means.
We separate what is a safety concern from what is a code compliance issue from what is a recommended improvement. Safety concerns are described first and clearly. The rest is explained in plain terms so you can decide what to address and in what order.
Not always. If the service entrance and the meter base are in good condition and the incoming amperage is already adequate, a panel replacement can be done without upgrading the service. We assess both sides before recommending what the job actually requires.
Safe wiring. Solid workmanship. Straight answers.
Call (859) 695-6995 and we will scope the job on the phone, give you the price, and let you decide before anything is scheduled.
That is the next step, and it is not more complicated than that. We are available every day from 9:00 AM to 10:00 PM.
Electrical work also reaches these towns: Lawrenceburg, Versailles, Georgetown, Wilmore.
Electrical problems do not always announce themselves clearly. A tripping breaker, a dead outlet, or a panel that cannot keep up with modern loads all point to work that needs to be done correctly the first time. We handle the full range of residential and commercial electrical work across Frankfort and Franklin County, from a single outlet replacement to a complete service upgrade.
Call (859) 695-6995 to get the scope and the price before anything is scheduled.
| Electrical Service | What's Included | When You Need It | Worth Knowing |
|---|---|---|---|
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Fuse box replacement, Subpanel installation, Load calculation included | Older homes adding EV chargers, appliances, or HVAC circuits that exceed current panel capacity | A load calculation is part of every panel job. We size the service to what the home actually draws, not just what it has now. |
| Backup Generator Installation | Transfer switch installation, Interlock wiring, Panel hookup, Circuit selection for generator feed | Franklin County homeowners who lose power during ice storms, severe thunderstorms, or extended outages | A transfer switch isolates the home from the utility line while the generator runs. Without one, the setup is both a code violation and a safety hazard for utility workers. |
| Ceiling Fan Installation | Fan and light kit wiring, Ceiling box upgrades for fan weight, New switch leg runs, Fan replacement | Rooms that need a fan added where no ceiling box exists, or where an existing box is not rated for fan weight | Independent fan and light control requires a switch leg that many older installations do not have. We run it as part of the job when needed. |
Call (859) 695-6995 and we will walk through what the job involves, confirm whether we cover your address, and give you the price before anything is scheduled.
(859) 695-6995