A lot of electrical work looks like a job for whoever is handy with a screwdriver until something goes wrong. Swapping a light fixture, adding an outlet, replacing a breaker: each one involves the panel, the grounding, or a live circuit, and each one done incorrectly creates a problem that shows up later, sometimes much later. We handle all of it for Georgetown homeowners, rental properties, and businesses across Scott County, from a single outlet that stopped working to a full panel replacement.
When you call, the person who answers knows the trade and can scope the job on the phone before anything is scheduled. You get a price before we book the visit, and the work is explained before it starts. That is how every job goes, whether it is a ceiling fan swap or a service upgrade.
We take calls every day from 9 AM to 10 PM at (859) 695-6995.
Georgetown has a real mix of housing. Newer construction on the edges of the city tends to have modern panels, arc-fault breakers, and wiring sized for the loads a current household puts on them. Older homes closer to the center of the city are a different situation. The wiring in a house built several decades ago was designed for fewer circuits, smaller loads, and a household that did not run a home office, an EV charger, and a central air system at the same time.
What turns up in those older properties varies. Knob-and-tube wiring is still present in some of the oldest homes and is not inherently dangerous in its original state, but it cannot be covered with insulation and it was never designed to be extended. Aluminum branch wiring from a later era is a different concern: the connections at outlets, switches, and fixtures are where it causes problems, and it requires specific devices and connectors rather than a straight swap with standard components. Neither situation calls for panic. Both call for a proper look before any work is added to the system.
Ungrounded outlets are common in older Georgetown homes, and they come up every time someone wants to add a three-prong receptacle where a two-prong one used to be. The right answer depends on what the wiring behind the wall can actually support. Where a grounding path can be run, we run it. Where it cannot, a GFCI outlet at the first receptacle in the circuit is a code-accepted approach that provides shock protection without fabricating a ground that is not there.
Bonding is the part of the system that most people never think about until an inspection flags it. The grounding and bonding system ties the panel, the water lines, and the structure together so that a fault has a clear path to ground rather than through a person. We check for it on every panel job and every inspection, because it is the part of the system that gets skipped when additions are made without a full review.
Good electrical work is not complicated, it is just done right, and getting it scheduled should not be complicated either. When you call, we ask about the problem, where it is in the home or building, and what the panel looks like. That conversation lets us scope the job accurately and give you a price before anything is put on the calendar. The scope and the price are settled on the call. You decide before we show up.
For problems that will not keep, we take urgent calls. A breaker that trips immediately after being reset, a burning smell near an outlet, or an outlet that sparks when something is plugged in are situations to call about right away rather than adding to the list. We are available every day from 9 AM to 10 PM, and we handle short-notice work when the schedule allows.
Tenants and businesses that need to stay open during a repair are a normal part of how we work. If access has to be arranged around a tenant's schedule, or if a commercial space needs to keep running while we address a panel or circuit issue, mention it on the call and we will work out what is practical. Call and we will get you back to full power.
An outlet that has never worked since you moved in is easy to ignore. A switch that sparks when you flip it is easy to assume is fine because it has always done that. An exterior light that has been out for two seasons gets added to the mental list and stays there. None of those are large jobs, and that is exactly why they are worth a call.
A dead outlet is usually a tripped GFCI device somewhere upstream on the circuit, a failed receptacle, or a wiring fault at the connection point. Any of those is a straightforward diagnostic. A switch that sparks briefly when it breaks the circuit is normal. One that sparks visibly or produces a burning smell is an arc-fault condition and belongs on a different list entirely. Exterior lighting that has stopped working often points to a failed fixture, a GFCI trip at the exterior receptacle, or a wiring issue in the outdoor run, and it is also the right moment to talk about whether the existing fixture and circuit are sized correctly for what the location actually needs.
The jobs people put off are rarely as involved as they imagine. The ones that get ignored long enough sometimes become more involved than they needed to be. One call and we are on it. If you want to see the whole range first, try our list of electrical services.
Battery-operated detectors are better than nothing, but hardwired alarms with battery backup are what code requires in new construction and most renovations, and they are what makes sense for a home where someone might sleep through a low-battery chirp at 2 AM. We wire them into the circuit, interconnect them so that one alarm triggers all of them, and confirm the placement meets current code requirements for the number of bedrooms and the layout of the home.
A panel replacement starts with a load calculation. We look at what the home currently draws, what is planned, and whether the service entrance can support the new panel's capacity. Older panels in Georgetown homes are often undersized for the loads a modern household puts on them. A breaker replacement is simpler but still requires matching the breaker to the panel manufacturer and the circuit's wire gauge. Neither job is a straight swap without checking what is behind it.
An EV charger or a hot tub often means checking the panel first. A Level 2 charger needs a dedicated 240-volt circuit, and the panel has to have available capacity and a slot for the new breaker. We confirm that on the call, run the dedicated circuit to the garage or parking location, and install the outlet or hardwired connection the charger requires. If the panel needs additional capacity before the circuit can be added, we handle that as part of the same project.
Replacing an existing fan is straightforward when the wiring is already in place. Installation where there is only a light fixture is more involved: the ceiling box has to be upgraded to a fan-rated box that can carry the weight and the movement, and a switch leg may need to be run for independent fan and light control. We handle both situations. If the ceiling has never had a fan and the wiring does not reach, we scope that on the call so there are no open questions before the visit.
Landlords and property managers in Georgetown call for a different set of reasons than homeowners do. Tenant complaints about a dead outlet or a tripping breaker need a fast response. Pre-lease inspections need a written record of what the wiring looks like and what, if anything, needs attention before the next occupant moves in. Code correction work after an inspection finding needs to be completed and documented before the property can pass.
We work around tenant schedules when access has to be arranged. We confirm what the visit will cover before we arrive, so the tenant is not surprised by the scope of the work. After the job, we can walk through what was done and what was found, which is the record a landlord needs when a repair touches something structural in the electrical system.
The invoice covers what was agreed on the call. If something unexpected turns up once the work is underway, we explain it before doing anything additional. No work gets added without a conversation first. That is a straightforward choice for homeowners and property managers who need to know exactly what they are paying for.
The price for electrical work depends on what the job actually involves. A single outlet replacement is a different conversation from a panel upgrade or a whole-home rewire, and the quote reflects that. What moves a price is what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made. Those are the variables, and they are the ones we work through on the call before anything is scheduled.
You get the scope and the price on the phone, before the visit is booked. If a job is straightforward, the quote is quick. If it is a larger project with multiple phases, we walk through what each part covers. The price is confirmed before we show up.
Call (859) 695-6995 and ask what the job involves. We will tell you directly.
We serve Georgetown as our primary city in Scott County, and coverage extends into the surrounding communities as well. Stamping Ground, Sadieville, Midway, and Paris are all areas we work in regularly, for both residential and commercial calls. If your address is outside Georgetown proper, call and ask. We will confirm coverage in under a minute.
Electrical work done to the standard the next inspection expects is what every job in this area comes back to, whether the property is in the city or in one of the smaller communities around it.
Yes. Call and describe the situation. We can walk you through what the problem likely involves and what the options are. You are not obligated to book anything by calling.
It can. Older homes in Georgetown sometimes have wiring configurations that are not visible until the wall or panel is opened, which means the diagnostic takes longer than it would in newer construction. We ask about the age of the home and the panel on the call so we can set realistic expectations before the visit rather than after.
Yes, and combining them is usually the most efficient approach. When you call, describe everything you want done and we will scope the full list on the phone so the visit covers it all at once.
Dead outlets, tripping breakers, and GFCI devices that will not reset are the most common calls from rental units. Older properties in Georgetown often have ungrounded receptacles or panels that were not sized for the load a modern tenant puts on them. We work around tenant schedules and confirm the scope with the landlord before the visit so everyone knows what the call covers.
It accounts for the appliances and equipment currently in the home, their individual draw, the service entrance capacity, and any planned additions. The result tells us whether the existing panel can handle the load or whether an upgrade is needed before adding more circuits.
Pumps, lights, and other pool or water feature equipment need dedicated circuits, GFCI protection, and weatherproof connections. Bonding is also required around pool water and metal components to prevent shock hazard. We handle the wiring side of that work.
A quote is based on what is visible and what you described on the call. If the work reveals something behind the wall or inside the panel that was not part of the original scope, we stop and explain it before doing anything additional. Nothing is added to the bill without a conversation first.
We confirm what the installer needs and when they need it, then schedule our work to match that sequence. Rough-in wiring needs to happen before the walls close, and fixture connections come after the installation is complete. Call and describe the project timeline.
Yes. Commercial properties that cannot shut down during a repair are a normal part of how we schedule. Mention it when you call and we will work out what is practical given the scope of the job and the layout of the space. Some work can be sequenced to avoid interrupting the parts of the building that need to stay live.
Some problems are urgent and some are not. Either way, the call is the right first step. You get a real conversation about the job, the scope, and the price before anything is scheduled. We are available every day from 9 AM to 10 PM.
Call (859) 695-6995 and reach Nicholasville Electrical Company.
How quickly we can be out depends on the schedule when you call, and we will tell you exactly what is available.
We are also in: Paris, Versailles, Frankfort, Lawrenceburg.
Electrical problems do not always announce themselves clearly. A tripping breaker, a dead outlet, or a panel that cannot keep up with modern loads all point to work that needs to be done correctly the first time. We handle the full range of residential and commercial electrical work across Georgetown and Scott County, from a single outlet replacement to a complete service upgrade.
Call (859) 695-6995 to get the scope and the price before anything is scheduled.
| Electrical Service | What's Included | When You Need It | Worth Knowing |
|---|---|---|---|
| Breaker & Fuse Repair | Failed or weak breakers, Fuse box repairs, Double-tapped breaker correction, Arc-fault breaker replacement | Homes where a breaker trips without an obvious cause or will not reset | A breaker that trips repeatedly is telling you something about the circuit load or the breaker itself. Replacing it without diagnosing the cause first misses the real problem. |
| Electrical Panel & Service UpgradesMost Popular | 100-amp to 200-amp upgrades, Fuse box replacement, Subpanel installation, Load calculation included | Older homes adding EV chargers, appliances, or HVAC circuits that exceed current panel capacity | A load calculation is part of every panel job. We size the service to what the home actually draws, not just what it has now. |
| Ceiling Fan Installation | Fan and light kit wiring, Ceiling box upgrades for fan weight, New switch leg runs, Fan replacement | Rooms that need a fan added where no ceiling box exists, or where an existing box is not rated for fan weight | Independent fan and light control requires a switch leg that many older installations do not have. We run it as part of the job when needed. |
Call (859) 695-6995 and we will walk through what the job involves, confirm whether we cover your address, and give you the price before anything is scheduled.
(859) 695-6995